Description
TOM.200 tube type dispenser which is hard to be material-hardened after discharge and dripping by original rotor mechanism and vacuum mechanism. Especially, this is suitable for anaerobic adhesive such as cyanoacrylate adhesive. Both of PTFE tube and silicon tube can be used, so it is good for fixed quantity discharge and supply of any type of fluid.
Specification
| Power |
AC100V240V 50/60Hz |
| Power consumption |
20W |
| External dimension |
W190D166H91 |
| Weight |
3kg |
| Rotation frequency of rotor |
0~100RPM (variable speed) |
| Discharge timer |
0.0199.99 (LED display) |
| Vacuum timer |
03sec |
| Vacuum interval |
02sec |
| Discharge volume |
0.0001cc/shot |
| Standard specification |
Rotor Teflon tube 1.42.0
Nozzle Silicon tube 1.01.6 |
| Continuous flow volume |
Teflon tube 0.02cc4.88cc/min (depend on tube dimension) |
| Silicon tube 0.3cc15.7cc/min (depend on tube dimension) |
| Super cone tube 0.3cc19.7cc/min (depend on tube dimension) |
| Non-standard applicable tube dimension |
Teflon 1.92.53.03.6 (T1 type) |
| Teflon 0.250.750.51.0 (T2 type) |
| Silicon 1.03.03.05.0 (G type) |
| Super cone 2.04.03.05.0 (G type) |
| Applicable viscosity |
Teflon tube 1~1,000cps |
| Super cone 1~10,000cps |
| Discharge completion signal |
Non-voltage contact signal (0.1sec pulse) |
| Accuracy |
15 |
Attached accessories
| Nozzle holder with handy switch MN-3 |
1 pc |
| 1.01.6 Teflon tube |
2m (additional by increments of 10m) |
| 1.42.0 Teflon tube |
2m (additional by increments of 10m) |
| Oiler for rotor |
1 pc |
| Connector for starting signal input |
1 pc |
| Connector for discharge completion output |
1 pc |
| Hex wrench M3 for attached screws |
1 pc |
Optional items
| Tubes |
10m (please contact us about the details) |
| Foot switch |
TOM-FS |
| Tube guide |
(T1/T2/G...... depend on tube used) |
Add a review
Your email address will not be published. Required fields are marked