Splined Hubs – Austin Healey 100 BN1/BN2 42mm Rear

Bolt-on Rear Splined Hub for the Austin Healey 100, 100/4, 100-4
(BN1 and BN2)

Bolt Pattern: 4 x 4.25" (108mm)
Thread Pitch: 12tpi (fine thread)
Type 42 Hub: aka 42mm.

• If using for a car other than the Austin Healey 100, see the technical drawing for the dimensions to make sure they are the right size for you. All measurements are in millimeters (mm).
• You may have to cut down your wheel studs to clear the rear spokes on your new wire wheels.
• IMPORTANT: If using on a different car, pay attention to overall diameter of your dust cap or castle nut if it sticks out. It will need to fit inside the back of the hub.