The B2BFAB Mk5 / Mk6 1.5" Camber Correcting Lift Kit isthe only on the market thatgivesthe lift you want without sacrificing handling!
The Problem:Forall PQ35/46 platformmodelsand the majority of road-going vehicles,a small amount of negative camber is dialed into the front and rear suspension to offer proper handling.Since there is noadjustment possible inthe front suspension components, zero camber or even positive camber is unavoidable with bolt through lift spacers or spring lifts.
"Why do I care?"The proper amount of negative camber ensures optimal contact between the tire and the road through all handling maneuvers. When front camber is outside of the manufacturer's specified range in the positive direction, the handling is floaty, twitchy, and generally unstable at highway speeds.Unfortunatelyall PQ35/46 platformmodelsdonot have a way to adjust front camber.
The Solution:By offsetting the upper mounting point of the front struts, our lift kit removes the excessive positive camber allowing proper suspension geometry and specifications.
*ColorInstallinstructionsincluded.*
Adjustable front swaybar endlinks are required for install available HERE.
WeSTRONGLYRECOMMENDreplacing ALL one time use hardware during the install to ensure proper torque specs and avoid hardware failure.Upgraded Complete OEM Hardware Kitis availableHERE.
Foroptimal rear shock travel and maximum life from your OEM shocks we suggest our Rear Shock Extender Kit availableHERE.(Front shock extenders are not required as front shock travel is not affected with the install of our kit)
Fits
Volkswagen Mk5/6 (2009-2014) Sportwagen (Including TDI)
Volkswagen Mk5/6 (2006-2014) Golf/GTI
Volkswagen Mk5/6 (2005.5-2018) Jetta/GLI
Volkswagen EOS (2007-2015) 2.0T
Audi A3 8P (2005-2013)
Add a review
Your email address will not be published. Required fields are marked